Lint in the exhaust path
A clean lint screen can coexist with accumulated lint in the duct or outside hood.

Portland Metro · Vancouver, WA
On LG dryers with Flow Sense, D90 generally warns that the exhaust path is heavily restricted, approximately 90% in LG’s guidance. It is an airflow warning, not a direct thermistor fault or a confirmed failed heater. Model, duct installation and gas/electric configuration affect the next steps.
LG dryers equipped with the applicable Flow Sense display. D80 and D90 are restriction levels, not interchangeable temperature errors; on some gas models LG also lists insufficient gas supply for D80.
Exact meaning can vary by model. Match the full display, appliance category and model number to your owner manual; a code alone does not confirm a failed part.
Dryer airflow must leave the home through the exhaust duct. Cleaning the lint screen does not clear a restriction deeper in a wall duct. D90 is more severe than D80; do not run additional heated cycles to see whether it disappears.
A clean lint screen can coexist with accumulated lint in the duct or outside hood.
A visible crushed connector or an exterior flap that cannot open can restrict exhaust.
Long runs and excessive bends can reduce airflow. On applicable gas models, LG’s D80 guidance also notes gas supply; gas checks belong to a qualified technician.
Use only normal controls and accessible exterior areas. Follow your model’s instructions; stop if a check requires moving the appliance, removing panels or working on electrical, gas or refrigerant components.
Stop heated drying until the restriction has been assessed. Burning odor, smoke or excessive heat requires immediate stop-use; gas odor requires leaving the area and contacting the gas utility or emergency services from a safe location.
A vent-cleaning professional can assess inaccessible exhaust runs; arrange appliance diagnosis if the warning remains after the exhaust installation is corrected. Do not bypass Flow Sense or work on gas connections.
When you contact North West Easy Fix, include the model number, the complete code and when it appears. We diagnose the appliance before recommending parts or quoting a repair.
The $99 diagnostic/service call fee is applied toward your repair cost when you proceed with the repair. It is not charged separately on top of that repair cost. Completed repairs include a 3-month parts and labor warranty.
North West Easy Fix provides mobile repair visits in Portland, Beaverton, Hillsboro, Tigard, Lake Oswego and Vancouver, WA. We contact you to confirm your appointment.
All Service AreasNo. LG identifies this as an airflow restriction indicator. Heater replacement cannot be justified from this code alone.
Do not continue heated drying with a severe restriction warning. Reduced airflow can create unsafe overheating conditions.
It may clear a display temporarily, but it cannot remove lint or correct duct routing. Address airflow rather than repeatedly resetting.
The obstruction may be farther along the duct or at the outside hood. Hidden runs need a qualified assessment.
These manufacturer references establish the code and appliance scope. North West Easy Fix is an independent repair business; these links do not imply manufacturer authorization.
Browse All Error CodesHave a question? Call us — we're happy to help.