Household dishwasher

Dishwasher

Why Is My Dishwasher Not Draining?

A dishwasher may retain excess water because a filter, hose or sink-side drain is restricted, or because its drain system is not operating correctly. A small amount in a model’s sump can be normal, so compare the water level with the owner manual before calling every trace a fault. Water covering the tub after a completed cycle or a recurring drain code deserves attention.

Understand the symptom before choosing a repair

Separate normal sump water from retained wash water

Dishwasher designs differ in where a small amount of water remains. Record how much you can see and whether the cycle completed. Foul or substantial retained water and a repeated drain warning are more informative than simply noticing moisture beneath a filter.

Consider the kitchen drain connection

The dishwasher shares a drainage route with sink-side plumbing on many installations. A slow sink, recent disposal installation or hose routing change can explain the timing of a problem. Do not dismantle the disposal or remove its knockout yourself.

Filter care is not pump repair

Some filters are owner-removable, but the space beneath can contain sharp fragments or protected components. Let the water cool, follow the exact manual and stop at the permitted filter. An E25-type pump warning is not permission to put fingers into a pump.

Common possible causes

Owner-removable filter buildup

Food debris may interfere with drainage where the model uses a cleanable filter.

Hose or connected sink drain

A restriction or installation problem can prevent water leaving normally.

Internal drain-system trouble

Persistent failed drainage needs diagnosis of the appliance and connected path.

Safe things you can check

Follow your exact owner manual. Keep checks to normal controls and accessible areas; stop if a step requires moving a heavy appliance, removing protective panels or handling electrical, gas or refrigerant components.

  1. Record water level, whether the cycle ended and any complete code before resetting.
  2. After the tub cools, clean and reseat only the removable filter specified by the manual.
  3. Check visible under-sink hoses and whether the sink drains normally; have recent disposal work reviewed by the installer.

Stop-use signs

Stop for leaks, hot water or sharp fragments. Do not pull the dishwasher out, open the pump or run repeated full cycles with retained water.

Signs professional inspection is needed

Persistent excess water after permitted filter maintenance, recurring drain codes or drain trouble with no visible external cause needs inspection. Sink drainage problems may also need a plumber.

Keep a note of the model, exact codes, when the symptom started and recent installation or maintenance. These observations help North West Easy Fix prepare without treating the symptom as a confirmed diagnosis.

Repair or replacement: what to weigh

If the obstruction is in shared plumbing, replacing the dishwasher may not solve it. For an appliance fault, compare diagnosis, condition, prior leaks and full installation costs before deciding.

Should I repair or replace my appliance?

Related service and problem information

Related error-code guides

Use a code guide only when the brand, appliance and model match. Exact meaning can vary by model; a code does not confirm a failed part.

Related appliance brands

Local help in Portland Metro & Vancouver, WA

North West Easy Fix provides mobile appliance repair visits across Portland Metro and Vancouver, Washington. We contact you to confirm your appointment and discuss the next steps.

Explore home service in Portland, Beaverton, Hillsboro and Vancouver, WA. All service areas.

Common questions

Is any water under the filter a fault?

Not necessarily. Some designs retain a small amount in the sump; use the exact manual and look at excess water after a completed cycle.

Can a new disposal affect drainage?

Yes. Installation connections and routing should be verified by the installer.

Can I reach into the pump to find debris?

No. Sharp material and protected components make that unsafe; limit checks to permitted filter maintenance.

Why preserve a code before resetting?

The exact code and cycle stage help distinguish drain trouble from leakage protection or another fault.

Further reading

Manufacturer maintenance and controls differ by model. North West Easy Fix is an independent repair business, not an advertised manufacturer-authorized service provider.

Ready to discuss your appliance?

The $99 diagnostic/service call fee is applied toward your repair cost when you proceed with the repair, not charged separately on top of it. Completed repairs include a 3-month parts and labor warranty.

  • $99 Diagnostic
  • 3-Month Warranty
  • Licensed · Bonded · Insured
All Appliance Repair Guides

Need Appliance Repair?

Have a question? Call us — we're happy to help.