Household dishwasher

Portland Metro · Vancouver, WA

Samsung Dishwasher LC / LE Error Code: What It Means

Samsung dishwasher LC, or LE on applicable models, indicates moisture detected in the leakage-sensor area. It may appear even without a visible puddle; a leak or spill is possible. Model and installation context determine what must be checked, not the letters alone.

  • Licensed · Bonded · Insured
  • 3-Month Warranty
  • $99 Diagnostic

Which models does this apply to?

Samsung dishwashers covered by the cited LC/LE leakage guidance. Do not transfer this definition to washers or other Samsung appliances.

Exact meaning can vary by model. Match the full display, appliance category and model number to your owner manual; a code alone does not confirm a failed part.

The sensor may detect water in a hidden base area. Drying visible water or clearing the display does not establish that the source has been repaired.

Common possible causes

Actual water leak

A supply, drain or internal connection may be leaking.

Spill or residual moisture

Moisture from a spill can reach the sensor area without an obvious ongoing puddle.

Installation-related moisture

Recent installation or movement provides useful context for leak diagnosis.

Safe things you can check

Use only normal controls and accessible exterior areas. Follow your model’s instructions; stop if a check requires moving the appliance, removing panels or working on electrical, gas or refrigerant components.

  1. Stop the dishwasher and record the display from a dry safe position.
  2. If safely accessible and clearly identified, turn off the appliance water supply; do not force a valve.
  3. Look for visible moisture at accessible under-sink connections without touching wiring or pulling the dishwasher out.

When to stop using the appliance

Stop use. If leakage is suspected, isolate power at a safely accessible dry breaker. Do not touch wet plugs, tilt the appliance or bypass the sensor.

When to call a technician

Arrange service for recurring LC/LE or any hidden or active leak. Explain whether it began after installation, cleaning or a spill.

When you contact North West Easy Fix, include the model number, the complete code and when it appears. We diagnose the appliance before recommending parts or quoting a repair.

$99 diagnostic, applied toward your repair

The $99 diagnostic/service call fee is applied toward your repair cost when you proceed with the repair. It is not charged separately on top of that repair cost. Completed repairs include a 3-month parts and labor warranty.

Related repair help

Home appliance repair in Portland Metro & Vancouver

North West Easy Fix provides mobile repair visits in Portland, Beaverton, Hillsboro, Tigard, Lake Oswego and Vancouver, WA. We contact you to confirm your appointment.

All Service Areas

Samsung Dishwasher LC / LE: common questions

Can LC appear with no puddle?

Yes. Samsung’s guidance covers moisture detected in an area you may not be able to see.

Can I keep using it if the floor is dry?

Do not assume the base is dry. Stop and have recurring leakage detection assessed.

Will a reset repair a leak?

No. Erasing the display does not locate or fix the water source.

Should I tilt it to drain the base?

No. Do not move or tilt the dishwasher to defeat the leak indication.

Manufacturer references

These manufacturer references establish the code and appliance scope. North West Easy Fix is an independent repair business; these links do not imply manufacturer authorization.

Browse All Error Codes

Need Appliance Repair?

Have a question? Call us — we're happy to help.