Household dishwasher

Portland Metro · Vancouver, WA

Frigidaire Dishwasher i20 Error Code: What It Means

Frigidaire dishwasher i20 indicates that the unit did not drain properly on models covered by the cited support article. The manufacturer points to the drain hose, disposal connection and glass trap/filter. This model-dependent code does not alone establish a failed pump.

  • Licensed · Bonded · Insured
  • 3-Month Warranty
  • $99 Diagnostic

Which models does this apply to?

Frigidaire dishwasher models using i20 as documented in the manufacturer reference. Installation heights and glass-trap layouts vary; use the exact manual rather than another model’s dimensions.

Exact meaning can vary by model. Match the full display, appliance category and model number to your owner manual; a code alone does not confirm a failed part.

A glass trap is a model-specific owner-maintenance feature, not permission to reach into a pump. Recent installation matters because an obstructed disposal connection or incorrect hose routing can imitate an appliance fault.

Common possible causes

Drain hose restriction

A kinked or obstructed drain hose can impede water removal.

Disposal installation

An unremoved knockout can block a newly connected dishwasher drain.

Filter or glass-trap debris

Debris in the permitted owner-cleanable assembly can affect drainage.

Safe things you can check

Use only normal controls and accessible exterior areas. Follow your model’s instructions; stop if a check requires moving the appliance, removing panels or working on electrical, gas or refrigerant components.

  1. Stop the cycle and let hot water cool before permitted filter or glass-trap cleaning.
  2. Inspect only visible drain-hose routing and compare it with the model manual.
  3. Have the installer verify a newly connected disposal; avoid pump access and sharp debris.

When to stop using the appliance

Stop for leaks or sharp debris. Do not reach into the pump or work near water and electrical connections.

When to call a technician

Arrange service if i20 persists after permitted cleaning and visible routing checks. Frigidaire lists model-appropriate reset options, but an unresolved drain restriction still needs correction.

When you contact North West Easy Fix, include the model number, the complete code and when it appears. We diagnose the appliance before recommending parts or quoting a repair.

$99 diagnostic, applied toward your repair

The $99 diagnostic/service call fee is applied toward your repair cost when you proceed with the repair. It is not charged separately on top of that repair cost. Completed repairs include a 3-month parts and labor warranty.

Related repair help

Home appliance repair in Portland Metro & Vancouver

North West Easy Fix provides mobile repair visits in Portland, Beaverton, Hillsboro, Tigard, Lake Oswego and Vancouver, WA. We contact you to confirm your appointment.

All Service Areas

Frigidaire Dishwasher i20: common questions

Can I clean the glass trap?

Only if your owner manual identifies it as removable maintenance; allow the tub to cool and avoid sharp debris.

Can a new installation cause i20?

Yes. The manufacturer includes hose routing and disposal connection among its checks.

Will resetting remove a hose kink?

No. Clearing a display cannot correct drainage installation.

Does i20 mean the pump is defective?

Not necessarily. The code reports drainage trouble rather than a confirmed failed part.

Manufacturer references

These manufacturer references establish the code and appliance scope. North West Easy Fix is an independent repair business; these links do not imply manufacturer authorization.

Browse All Error Codes

Need Appliance Repair?

Have a question? Call us — we're happy to help.